Description

The proposed ASHRAE Standard 152P, “Method of Test for Determining the Design and Seasonal Efficiencies of Residential Thermal Distribution Systems ” (ASHRAE 2002), has recently completed its second public review. As part of the standard development process, this study compares the forced air distribution system ratings to measured field results. Fifty-eight field tests were performed on cooling systems in eleven homes in the summers of 1998 and 1999. Seven of these houses had standard attics with insulation on the attic floor and a well-vented attic space. The other four houses had unvented attics where the insulation is placed directly under the roof deck, and the attic space is not deliberately vented. Each house was tested under a range of summer weather conditions at each particular site and, in some cases, the amount of duct leakage was intentionally varied. The comparison between predicted efficiencies and the measured results includes evaluation of the effects of weather, duct location, thermal conditions, duct leakage, and system capacity. The results showed that the difference between measured results and those calculated using proposed Standard 152P is about 5 percentage points on average if weather data, duct leakage, and air handler flow are well known. However, the accuracy of the standard is strongly dependent on having good measurements of duct leakage and system airflow. Given that the uncertainty in the measured results is typically also about 5 percentage points, the Standard 152P results are acceptably close to the measured data.

Units: Dual

Citation: Symposium, ASHRAE Transactions, vol. 109, pt. 1

Product Details

Published:

2003

Number of Pages:

10

File Size:

1 file , 220 KB

Product Code(s):

D-16822